Designed for uncoiling a metal strip coiled in a 2 000 kg roll and up to 350 mm wide. The Expanding of the support bars synchronously by rotation of the handwheel. Equipped with a system to prevent unwinding by inertia.
Line is intended for production of a half-round or shaped gutters from thin-sheet galvanized steel 0,4-0,6 mm of thickness with plastisol or pural coatings. Gutter is one of the elements of the rain ware system responsible for draining rainwater and meltwater from the roofs of buildings.
Dual sided hemming machine is intended for rolling of edges in a single pass from thin-sheet galvanized steel 0,4-0,5 mm of thickness. The machine with stepless width adjustment from 90 mm to 690 mm conveniently via handwheel.
PK series shaping machines are designed for production of “Window trim” profile made of coiled galvanized steel or steel with polymer coating, 0.4 to 0.6 mm thick. The shape rolling is performed in two passes - one side at a time.
Produces roofing panels with single snap lock seam, the distinctive features of which are simple and quick installation of the panel without the use of special tools, hidden mounting system, allow for thermal expansion of the material.
Equipment is intended for production of a gutter from thin-sheet galvanized steel 0,4-0,6 mm of thickness with plastisol or pural coatings. Gutter is one of the elements of the rain ware system responsible for draining rainwater and meltwater from the roofs of buildings.
Double-support decoiler RMSC is designed to hold and decoil sheet materials from the coils. Wide of the coils 1250 mm, maximum load 8000 kg. Equipped with manual mandrel expansion, from 415 to 620 mm diameter with brake.
A mandrel with synchronous support bars expanding enables fast and precise coil fixing, and the double-frame support ensures safe operation.
To prevent from inertial roll uncoiling, the decoiler is equipped with a braking device.
Loading expandable mandrel with coil
1. Using the threaded nut, collapse the mandrel small enough to fit into the inside diameter of the coil.
2. Slide the expandable mandrel into the center of the coil.
3. Turn the threaded nut clockwise until the support bars on the arbor are just snug against the inside of the coil.
4. Finish by rotating the threaded nut clockwise until the support bars are very tight against the inside of the coil.
5. Verify that material is in proper alignment with machine.
6. The Coil and mandrel are now ready for loading.
Manual double-support decoiler RMSC-1250 от компании Мобипроф - надежное оборудование от производителя. Оформить заказ в городе Липецк вы можете по телефону +7 (800) 333-41-10 или оставив заявку на сайте.